3M 40800, 800rf manual Inside Safety Guards, Outside Safety Guards

7-INSTALLATION (continued)

7.5Safety Guards: Inside and Outside Machine Emergency Stop Push-Button

Position and assemble the inside (A) and outside (B) guard panels with the upper and bottom brackets and stiffening profile plates as shown in the pictures (Figure 7-4).

Inside Safety Guards

Support brackets (upper and bottom); 4+4 socket head screws each bracket (Figure 7-5).

Stiffening profile plate (upper): 2+2 socket head screws (Figure 7-6).

Outside Safety Guards

Support brackets (upper and bottom);

4+4 socket head screws each bracket.

Left hand bracket (with pre-assembled photocell); Right hand bracket (with pre-assembled reflector). Assemble the emergency push button unit as shown

(Figure 7-7 & 7-8).

Stiffening profile plate (upper): 2+2 socket head screws (Figure 7-9).

7.6Connection between the Infeed Conveyor 800rf

Lift the infeed conveyor placing the forks under the points where there are the labels (Figure 7-10).

800rf-NA 18

B

Figure 7-4
	A

Figure 7-5

Figure 7-6

Figure 7-7

Figure 7-8

Figure 7-9

Forklift on Opposite Side

Figure 7-10

2012 March