3M 800rf Additional Instructions, Enclosures / Special Info, Information for Disposal of Machine

14-ADDITIONAL INSTRUCTIONS	15-ENCLOSURES / SPECIAL INFO.
14.1 Information for Disposal of Machine	15.1 Statement of Conformity

The machine is composed of the following materials:

-Steel structure

-Nylon rollers

-Drive belts in PVC

-Nylon pulleys

For machine disposal, follow the regulations published in each country.

14.2 Emergency Procedures

In case of danger/fire:

Disconnect plug of power cable from power supply.

(Figure 14-1)

IN CASE OF FIRE

Use a fire extinguisher containing CO2 (Figure 14-2).

Figure 14-1

See Section 1.

15.2Emission of Hazardous Substances Nothing to report

15.3List of Safety Features

List of components/assemblies with safety functions

-LATCHING EMERGENCY STOP BUTTON

-Thermal cut-out relay

-Fixed guards upper drive belts

-Blade guard assemblies on both taping heads

-Important: Install earth wire protection on electrical installation.

All safety features/components must be explained and highlighted to all operators and to the person responsible for spare parts in order to ensure that these components are always on hand or ordered as a priority procedure.

ONLY USE ORIGINAL REPLACEMENT PARTS

15.4Copies of Test Reports, Certifications (etc.) Required by User

NA

Figure 14-2

800rf-NA 49 2012 March