3M 800rf, 40800 manual Operation

9-OPERATION

9.1 Operation

-Give air to the machine by the ON/OFF valve, set the main switch to ON (I) position;

-Close the safety guards; release the E-stops;

-Press AUXILIARIES button,

-Press RESET button; press START button.

The box, after passed the infeed conveyor belt, obscures the first photocell (Figure 9-1)

When the second photocell is obscured the infeed conveyor belt goes down in order to stop the next box. The side guides A align the box.

The next box obscuring the first photocell cause the infeed conveyor belt stoppage (Figure 9-2).

The side guides open and the box obscures the third photocell. The side drive belts B go against the box and, if the box is longer than 500mm, the rear flap folder is controlled (Figure 9-3).

When the 4th photocell is obscured, the side drive belts stop. The gate between the rollers, positions the box correctly (Figure 9-4).

The upper group then comes down on the box after folded the front flap, the height pick-up device stops the upper group descent (Figure 9-5).

Figure 9-1

A

Figure 9-2

B

Figure 9-3

Figure 9-4

		Figure 9-5
800rf-NA	25		2012 March