3M 40800, 800rf SPECIFICATIONS 4.1 Power Requirements, Operating Rate, Operating Conditions, Tape

12

800rf-NA

36mm [1 1/2 inch] minimum to 50mm [2 inch] maximum

800rf Case Sealer. This model offers 3-inch wide upper and lower AccuGlide™ 3 Taping Heads for tape widths from 2 inches [48 millimeters] to 3 inches [72 millimeters].

WARNING

4-SPECIFICATIONS

4.1 Power Requirements

Electrical: 115 Volt, 60Hz, 3.8 A (440 watts)

(*Note: Electric Information may not relect machine electrical settings/requirements in your area)

The machine is equipped with a 2.4m [8 foot] standard neoprene covered power cord and a grounded plug. Contact your 3M Representative for power requirements not listed above.

Pneumatic – 6 bar gauge pressure [87 PSIG] @ 21 C, 1.01 bar [3.75 SCFM] at 15 boxes per minute A pressure regulator is included

Machine requires 75 – 140 PSIG [5.2 – 9.5 BAR] 7.0 SCFM

[11.89 m3/h 21oC, 101 kPa] at the regulator, maximum at maximum cycle rate. The optimum operating set point on the gauge is 95 – 100 PSIG.)

4.2Operating Rate

Box drive belt speed is approximately 0.5 m/s [100 feet per minute]. Infeed conveyor speed: 21m/min

Production = 600 boxes/hour (average)

4.3Operating Conditions

Use in dry, relatively clean environments at 4.4o C to 48.9o C [40o F to 120o F] with clean, dry boxes. Note: Machine should not be washed or subjected to conditions causing moisture condensation on

components.

		• To reduce the risk associated with fire
		and explosion hazards:
		− Do not operate this equipment in poten-
4.4	Tape	tially flammable or explosive environments.
Scotch® pressure-sensitive film box sealing tapes.
4.5	Tape Width

2012 March