3M 800rf Table of Contents, Shipment, Handling, and Storage, Unpacking, Installation, Controls

TABLE OF CONTENTS (continued)

5. Shipment, Handling, and Storage
	5.1	Packed Machine Shipment and Handling			15
	5.2	Overseas Shipment Packaging (Optional)			15
	5.3	Handling and Transportation of Uncrated Machine			15
	5.4	Machine Storage			15
6. Unpacking
	6.1	Uncrating			16
	6.2	Packaging Materials Disposal			16
7.	Installation
	7.1	Operating Conditions			17
	7.2	Space Requirements for Machine Operation and Maintenance			17
	7.3	Tool Kit / Parts Supplied with the Machine			17
	7.4	Machine Positioning / Bed Height			17
	7.5	Plastic Ties Removal			18
	7.6	Assembly Completion / Machine Set-Up			18 - 21
	7.7	Preliminary Electric Inspection			22
	7.8	Phases Inspection (for 3 phase)			22
	7.9	Completion of Taping Head			23
8.	Controls
	8.1	Control Board			24
9.	Operation
	9.1	Operation			25 - 27
	9.2	Operation Methods			27
	9.3	Stop Methods			27
	9.4	Alarms			28
10. Safety devices
	10.1		Blade Guards		29
	10.2		Emergency Stop Button / Stop Switches		29
	10.3		Stop Switches		29
	10.4		Electric System		29
11. Set-Up and Adjustments
	11.1		Tape Loading on the Top Unit		30
	11.2		Tape Loading on the Bottom Unit		31
	11.3		Tope Drum Alignment		31
	11.4		Tape Drum Friction Brake Adjustment		31
	11.5		Adjustment of Taping Units According to the Type of Boxes		31
	11.6		Main Pressure Regulator		32
	11.7		Centering Guides Pressure		32
	11.8		Side Drives Pressure Adjustment		32
	11.9		Box Height Pick-up		33
	11.10		Upper Unit Descent Pressure Regulator		33
	11.11		Pneumatic Speed Regulators		34
	11.12		Speed Regulators of the Rear Flap Folder		35
	11.13		Adjustment of the Upper Unit Height		35
	11.14 Adjustment of the Sensor that Stops the Descent of the Upper Unit				36
	11.15		Adjustments of the Side Compression Rollers		37
	11.16		Adjustment of the Magnetic Limit Switch on the Side Drives Air Cylinder		37
	11.17 Use and Adjustments of the Photocells				38
	800rf-NA			i	2012 March
				iv