3M 40800, 800rf manual Unpacking, Uncrating, Removal of Pallet, Disposal of Packaging Materials

6-UNPACKING

6.1 Uncrating

The envelope attached to the shipping box contains the uncrating instructions of the machine (Figure 6-1).

Removal of Pallet

Loosen and remove nuts and brackets using the open end spanner supplied in the tool box (Figure 6-4).

		Figure 6-1				Figure 6-4
Cut straps. Cut out staple positions along the bottom				A cardboard box is located under the machine body.
of the shipping box or remove staples with an				Retrieve the instruction manual for additional proce-
appropriate tool (Figure 6-2).				dures of the set up. The box also contains parts re-
				moved for shipping, spare parts and tools.
				Cut the stretch film and remove the control board, the
				guards panel and the accessories box.
				6.2 Disposal of Packaging Materials
				The 800rf package is composed of:
				-	Wooden pallet
			Figure 6-2
				-	Cardboard shipping box
After cutting out or removing the staples, lift the				- Wooden supports
				-	Metal fixing brackets
shipping box in order to clear the machine				-	PU foam protection
(two persons required).				-	PP plastic straps
				-	Dehydrating salts in bag
				-	Special bag of laminated polyester/aluminium/
				-	Polyethylene (sea freight package only)
				-	Polyethylene protective material
				For the disposal of the above materials, please follow
				the environmental directives or the law in your country.
	Figure 6-3
Transport the machine with a fork-lift truck to the oper-
ating position. Lift the pallet at the point indicated by
labels on the front, back, and right side of the machine
Figure 6-3(weight of machine + pallet =
See Specifications).
	800rf-NA			16			2012 March