Line Keys, Programmable Keys, and Softkeys

14.In the “Value” field, enter a multicast IP address and a port number for the Paging key. When you press this key, the phone initiates an outgoing multicast RTP session to the specified address using the specified port. (For example, 239.0.1.15:10000).

Notes:

1. When you select Paging for the “Type” field, the “Line” field is disabled.

2.The “Value” field allows for one multicast address entry only.

15.To receive RTP steams for Group Paging, you must also configure the "Paging Listen Addresses" parameter at the path, Basic Settings->Preferences->Group Paging RTP Settings. For more information about setting this parameter, see “Group RTP Paging (receives RTP streams)” on page 235.

16.Click to save your changes

Using the Paging Key

The following procedure describes the use of the Paging key on the IP Phone. The procedure assumes you have already configured the Paging key using the Aastra Web UI.

IP Phone UI

Notes:

1. Recipient of a Paging call can set a global “Do Not Disturb” (DND) to ignore any incoming pages.

2.For incoming Paging, the phone uses the Intercom configuration settings. The incoming Page is dependant on the “Allow Barge-In” parameter setting and the “Idling/On Call” state.

1.On the IP Phone, press the softkey, programmable key, or expansion module key you configured for Paging (labeled as “Group 1” in the following illustration).

Services

Icom

Dir

 

Callers

 

Tues Jan1 10:00am

Group 1

LAB

ACD

146

Model 6755i IP Phone User Guide

Page 154
Image 154
Aastra Telecom manual Model 6755i IP Phone User Guide, Using the Paging Key