MultiModemISDN User Guide
terminal— The screen and keyboard device used in a mainframe environment for interactive data entry. Terminals have no box, which is to say they have no file storage or processing capabilities.
terminal adapter (TA)— An ISDN DTE device for connecting a
tone dialing— One of two methods of dialing a telephone, usually associated with
TSR (terminate and stay resident)— A software program that remains active and in memory after its user interface is closed. Similar to a daemon in UNIX environments.
twisted pair wiring— A type of cabling with one or more pairs of insulated wires wrapped around each other. An inexpensive wiring method used for LAN and telephone applications, also called UTP wiring.
Type A: The upstream (USB Type A) connector. A Type A Connector is for those devices on which the external cable is permanently
attached. Connectors for USB come in two designs: the 'A' and 'B' types. Upstream connections (computer, hub input, etc.) areadem using the 'A' type connector, downstream connections (peripherals, hub outputs) are made using the 'B' type connector. The USBspec defines two types of connectors to protect the bus from illegal topologies (e.g., connecting one downstream port back to another, etc.) and to prevent
Type B: The uplink (USB Type B) connector. A Type B Connector is for detachable external cables. Allows for double ended cable
assemblies. Connectors for USB come in two designs: the 'A' and 'B' types. Upstream connections (computer, hub input, etc.)madeare using the 'A' type connector, downstream connections (peripherals, hub outputs) are made using the 'B' type connector. The USBspec defines two types of connectors to protect the bus from illegal topologies (e.g., connecting one downstream port back to another, etc.) and to prevent
U
U reference point— A
UHCI (Universal Host Controller Interface): The USB Universal Host Controller Interface. All transfers on the USB are initiated by the host system’s host controller. The host controller is responsible for controlling traffic on the USB and can be appropriately programmed to transfer data to and from USB devices. This is typically a PCI device that can be programmed to run a given schedule of transfers on the USB and bus master the results into memory for processing by the host software. There are currently two standards for host controllers: OpenHCI (OHCI or Open Host Controller Interface) and UHCI (Universal Host Controller Interface). Both these standards define register level interfaces of the host controller to PCI bus. Bandwidth allocation over the USB is software managed and is done by the programming of the host controller.
Universal Serial Bus: A collection of Universal Serial Bus devices and the software and hardware that allow them to connect the capabilities provided by functions to the host.
Universal Serial Bus Device: Includes hubs and functions. See device.
Universal Serial Bus Driver: The host resident software entity responsible for providing common services to clients that are manipulating one or more functions on one or more Host Controllers.
Universal Serial Bus Interface: The hardware interface between the Universal Serial Bus cable and a Universal Serial Bus device. This includes the protocol engine required for all Universal Serial Bus devices to be able to receive and send packets.
Unshielded Twisted Pair (UTP):
Upstream: The direction of data flow towards the host. An upstream port is the port on a device electrically closest to the host that generates upstream data traffic from the hub. Upstream ports receive downstream data traffic.
USB: See Universal Serial Bus.
USBD: See Universal Serial Bus Driver.
USB Performance categories: Low Speed (Interactive Devices at
UTP (unshielded twisted pair) —
V
V.110— One of the terminal rate adaptation protocols for the ISDN
