AC International MTA128ST-USB manual S67, S68

Chapter 4 - AT Commands, S-Registers, and Result Codes

3Austria

4Belgium

5Cyprus

6Denmark

7Finland

8France

9Germany 1

10Germany 2

11Greece

12Iceland

13Ireland

14Italy

15Luxembourg 1

16Luxembourg 2

17Malta

18Netherlands

19Norway

20Portugal

21Spain

22Sweden

23Switzerland 1

24Switzerland 2

25United Kingdom 1

26United Kingdom 2

27United States

Default: 0 (25 Hz, single ring, 2 sec. on, 4 sec. off)

Description: Sets the frequencies and cadences used when ringing the device attached to

	the POTS port (phone, modem, fax). Select the appropriate country to use
	the frequencies and cadences specified according to ETS 300 001 (Chapter
	1:1992, p. 56). The Austria and France settings default the frequency to 25
	Hz since the TA doesn’t support a 50 Hz nominal frequency. A number 1 or 2
	next to a country name indicates the availability of either alternate nominal
	frequencies or alternate cadences. You also can configure frequencies and
	cadences by using @CONFIG menu (selection #6— POTS Port
	Configuration) and/or with S-registers S44, S67, S68, S69, S70, and S71.
	Save configurations with the &W or &W0 command.
S-register:	S67
Function:	Single or Dual Cadence Ring Signal
Unit:	Decimal ASCII code
Range:	0 (Single), 1 (Dual)
Default:	0 (Single-cadence ring signal)

Description: Sets the POTS port ring signal for single or dual cadence. Examples of a

	dual cadence include Ireland (S66=13), United Kingdom 1 (S66=25), and
	United Kingdom 2 (S66=26).
S-register:	S68
Function:	First Active Duration
Unit:	1 ms
Range:	5–9995
Default:	2000 ms

67