17
3.Firmly connect the EasyLink Combo Drive (connector to connector) to the computer.
To disconnect the EasyLink Combo Drive:
1.Click on the HotIDE icon ( ) on the Windows taskbar.
2.Select the stop operation.
A message appears to confirm the stop operation.
3.Click on OK.
4.Disconnect the EasyLink Combo Drive.
5.Tuck in the EasyLink Combo Drive cable connector into its storage slot.
Note: If the computer is on, and you disconnect the EasyLink Combo Drive without using the HotIDE stop function, the computer will hang (stop operating normally). Connect the EasyLink Combo Drive again to solve this problem. It is advisable to follow the connect/disconnect procedures discussed above. If the computer is off, you can disconnect the EasyLink Combo Drive at your convenience.
Ejecting media
Ejecting a floppy disk
Press the floppy disk eject button to eject a floppy disk from the floppy drive.