Security

The Security screen contains parameters that help safeguard and protect your computer from unauthorized use.

 

InsydeH20 Setup Utility

Rev. 3.5

Information

Main Advanced

Security

Power Boot

Exit

Supervisor Password Is:

Clear

Item Specific Help

Install or Change the

User Password Is:

Clear

password and the length

HDD Password Is:

Clear

of password must be less

Set Supervisor Password

 

 

than eight words.

 

 

 

Set User Password

 

 

 

Set Hdd Password

 

 

 

Power on password

[Enabled]

 

 

 

 

 

F1 Help

↑↓ Select Item

F5/F6 Change Values

F9 Setup Default

ESC Exit

←→ Select Menu

Enter SelectXSubMenu

F10 Save and Exit

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Parameter

Description

Option

 

 

 

Supervisor Password Is

Shows the setting of the Supervisor password

Clear or Set

User Password Is

Shows the setting of the user password.

Clear or Set

 

 

 

HDD Password Is

Shows the setting of the hard disk password.

Clear or Set

 

 

 

Set Supervisor Password

Press Enter to set the supervisor password. When

 

 

set, this password protects the BIOS Setup Utility

 

 

from unauthorized access. The user can not either

 

 

enter the Setup menu nor change the value of

 

 

parameters.

 

Set User Password

Press Enter to set the user password. When user

 

 

password is set, this password protects the BIOS

 

 

Setup Utility from unauthorized access. The user can

 

 

enter Setup menu only and does not have right to

 

 

change the value of parameters.

 

 

 

 

Set HDD Password

Enter HDD Password.

 

 

 

 

Power on password

Defines whether a password is required or not while

Enabled or

 

the events defined in this group happened. The

Disabled

 

following sub-options are all requires the Supervisor

 

 

password for changes and should be grayed out if the

 

 

user password was used to enter setup.

 

 

 

 

NOTE: When you are prompted to enter a password, you have three tries before the system halts. Don’t forget your password. If you forget your password, you may have to return your notebook computer to your dealer to reset it.

30

Chapter 2

Page 40
Image 40
Acer 4730 manual Security, Parameter Description Option, Clear or Set, Enabled or