Actiontec electronic 56K V.90 manual S89 Timer to Control Sleep Mode, S90, S91

S 48 = 128 Negotiation disabled; forces immediate fallback options specified in S36.

The following chart lists the S36 and S48 configuration settings necessary to negoti- ate certain types of connections:

		S48=7	S48 =128
	S36 = 0, 2	LAPM or hangup	do not use
	S36 = 1, 3	LAPM or async	async
	S36 = 4, 6	LPAM, MNP, or hangup	MNP or hangup
	S36 = 5, 7	LAPM, MNP, or async	MNP or async
S89	Timer to Control Sleep Mode
	Range:	0, 5-255
	Default:	10

This command displays the number of seconds of inactivity (no characters sent from the DTE, no RING) in the off-line command state before the modem places itself into standby mode. A value of zero prevents standby mode.

If a number between 1 and 4 is entered for this register, it will set the value to 5, and the inactivity before standby will be 5 seconds. This is done for compatibility with previous products which allowed time-outs down to 1s.

S90 Local Phone Status

0= local phone on-hook

1= local phone off-hook

This register tells the status of the local phone. It is read only.

S91	Line Transmit Level
Range:	6-15
Default:	15
Units:	1 dB

This register is effective only for Japan. It specifies the line transmit level in dB with an implied minus sign.

74