Actiontec electronic 56K V.90

S38 56K Dial Line Rate (default 1)

There are 2 S-registers which support K56flex connections. S38 sets the maximum

56K downstream speed that the modem attempts to connect. To disable K56flex, set

S38 to 0. The S37 register is used to control the upstream V.34 rate. (ref. V.34 Data/

Fax Document). Use the S109 register to control V.90 connections.

S38 = 0 K56flex disabled - V.34 connection (see S37)

S38 = 1 K56flex autorate - maximum achievable connection

S38 = 2 32000 bits / s

S38 = 3 34000 bits / s

S38 = 4 36000 bits / s

S38 = 5 38000 bits / s

S38 = 6 40000 bits / s

S38 = 7 42000 bits / s

S38 = 8 44000 bits / s

S38 = 9 46000 bits / s

S38 = 10 48000 bits / s

S38 = 11 50000 bits / s

S38 = 12 52000 bits / s

S38 = 13 54000 bits / s

S38 = 14 56000 bits / s

S42 Auto Rate (default 1, range 0-1)

0 = auto rate disabled, 1 = enabled.

Range: 0-1

Default: 1

This command is used for testing and debugging only. V.32bis and V.22bis auto rate

is disabled. Retrain operation is disabled or enabled in data mode, and fallback is

disabled in data mode.

S43 Auto Mode (default 1, range 0-1)

0 = auto mode disabled, 1 = enabled

Range: 0-1

Default: 1

This command is used for testing and debugging only. V.32bis startup auto mode

operation is disabled.

S48 LAPM Error Control and Feature Negotiation (default 7)

S48 = 7 Negotiation enabled.