Actiontec electronic 56K V.90 manual An, Bn, Modem Port Flow Control

\An Select Maximum MNP Block Size

The modem will operate an MNP error corrected link using a maximum block size controlled by the parameter supplied.

Command	Effect
\AO	64 characters
\A1	128 characters
\A2	192 characters
\A3	256 characters (Default)

Result Codes:

OK	n = 0, 1, 2, 3
ERROR	Otherwise

\Bn Transmit Break to Remote

In non-error correction mode, the modem will transmit a break signal to the remote modem with a length in multiples of 100ms according to parameter specified. The command works in conjunction with the \K command.

	Command	Effect
	\B1-\B9	Break length in 100ms units. (Default = 3.) (Non-error
		corrected mode only.)
Result Codes:
	OK	If connected in data modem mode.
	NO CARRIER	If not connected or connected in fax modem mode.
\G	Modem Port Flow Control
	Command	Effect
	\G0	Returns an “OK” for compatibility (default).
	\G1	NOT SUPPORTED responds ERROR.

57