Actiontec VoSKY Call Center User Manual

To connect Call Center in Dual-Line mode:

1.Get the phone cable from the telephone and insert one end in the “Phone” port on the rear panel of Call Center.

2.Connect the other end of the phone cable to the telephone.

3.Using the supplied phone cable, insert one end in the “Line” port on the rear panel of Call Center.

4.Insert the other end of the supplied phone cable in a standard phone line outlet. The components should be connected similarly to the figure below:

Call Center is connected in Dual-Line mode. Next, go to chapter 4, “Installing Call Center Software.”

15

Page 18
Image 18
Actiontec electronic UP102 user manual