8-15
Installing ATM Software for Novell NetWare
4
At the server system console prompt, type the following
command and press Enter:
load alane elan_id=
n
where
n
is the ELAN ID numb er.
5
At the Enter ELAN ID (0-3) prompt, type 0 (for the first ELAN)
and press Enter.
Several messages appear on the screen. The last message
should read as follows:
alane0: N7500 ELAN is Active
Removing ATM Software
This section contains instructions for removing ATM drivers for
Novell NetWare 3.12 and 4.1.

Removing ATM Software for NetWare 3.12

To remove the Adaptec ATM software for Novell NetWare 3.12
1
Type the following command at the system prompt, and press
Enter:
load edit
2
In the File Edit screen, type the following command at the
system prompt and press Enter:
sys:\system\autoexec.ncf
The File SYS:\SYSTEM\AUTOEXEC.NCF screen appears.
3
Delete the following command:
sys:\system\atms.ncf
4
Save and exit the file.