3-4
ANA-5910/5930/5940 User’s Guide
Connecting the ANA-5910/5930/5940 Adapter to the Network
Before you can use your ANA-5910/5930/5940 adapter, you must
connect it to an ATM switch.

Connecting to the ANA-5910

Note:
The RJ-45 connector pinout on the adapter conforms
with the IBM de facto standard. If y ou r switch connector
pinout is not compatibl e with this standard, obta in or create
a cable to convert to the required pinout.
To connect the ANA-5910 to an AT M swit ch:
1
Obtain the connecting cable.
2
Connect the RJ-45 connector at one end of the cable to the RJ-45
socket on the ANA-5910.
3
Connect the RJ-45 connector at the other end of the cable to the
ATM wall port or directly to the RJ -45 socket on the ATM
switch, as illustrated in Figure3-3. See your system
administrator for assi stance.
Figure 3-3. Connecting the UTP/STP Cable to the ATM Switch