Adaptec 5ANA-940, ANA-5910, ANA-5930 - page 30

4-2
ANA-5910/5930/5940 User’s Guide
Installing LANE Device Drivers
LANE client drivers are installed from the Network Settings dialog
box in the Control Panel. Up to 4 clients (numbered 0 to 3) can be
installed at one time. To configure multiple clients, you must install
the first client (0) before you can install any additional client.
Installing a LANE Client Driver
Follow these procedures for installing a LANE client driver. If you
are installing the Adaptec LANE Client device d river for the first
time, your configuration address number (ELAN number) must be
assigned to (0). Additional drivers can be i nstalled with unique
numbers 1 to 3.
1
From the Control Panel window, double-click on the Network
icon.
2
Select the Adapters tab from the Network Settings dialog box.
3
Click on the Add button to add a device driver.
4
Insert the ALANE Drivers for Windows NT diskette in the
diskette drive. Select the Have Disk button.
5
Type the drive letter of the diskette drive that contains the
ALANE Drivers for Windows NT diskette, and select OK.
6
Select Adaptec Inc. ATM LANE Adapter, and select OK.
The Adaptec LANE Configuration dialog box appears.