Removing ATM Software for NetWare 4.1
To remove the Adaptec ATM software for Novell NetWare 4.1
1
Boot the server.
2
At the server system console prompt, type the following
command and press Enter:
load install
3
From the Installation Options menu, se lect Driver options and
press Enter.
4
From the Driver Options menu, select Configure network
drivers and press Enter.
5
From the Additional Driver Actions l ist, select Deselect a
selected driver and press Enter.
If only one ATM driver is installed, the Un load driver anyway?
menu appears. Go to step8.
If two or more drivers are installed, the Selected Network
Drivers menu appears. Go to the next step.
6
From the Selected Network Drivers menu, select the driver
you want to remove and press Enter.
7
From the Unload driver anyway? menu, select Yes.
8
When the message screen appears, press Enter.
9
From the Additional Driver Act ion s menu , se lect Retur n to the
previous menu and press Enter.
10
From the Driver options menu, select Return to the previous
menu and press Enter.
11
From the Installation Options menu, se lect Exit and press
Enter.
12
From the Exit INSTALL menu, se lect Yes and press Enter.