4-14
ANA-5910/5930/5940 User’s Guide
Using Device Drivers and Utilities

Stopping ATM Drivers

To stop AT M drivers:
1
If your path is not set up, chan g e to the following directory :
\winnt\system 32\adptaatm\bi n
2
Stop the driver using the appropriate command below and in
the following order:

Starting ATM Drivers

To start the ATM drivers
1
In the Program Manager’s Main group window, select the
MS-DOS Command Prompt icon.
The Command Prompt window appears.
1
If your path is not set up, chan g e to the following directory :
\winnt\system 32\adptaatm\bi n
2
Start the drivers you need by entering the commands in the
following order:
Various command-line options are available for each utility. You can
get help for any of the commands listed in this appendix by typing
-h after the utility, for example:
aatmcnfg -h
alancnfg -s stops the
alane.sys
driver
aatmcnfg -s stops the
atmo.sys
driver
aatmcnfg starts the
atmo.sys
driver; use the -q option if
you

do not

want to use SVCs and if you do not
want to register with an ATM switch (for
example, in back-to-back connections); use the
(-a) option if your switch does not support ILMI
address registration
alancnfg starts the
alane.sys
driver