5-17
Installing ATM Version 2.0x Drivers for Windows NT
Installing LANE Device Drivers
Note:
Ensure that CIP drivers have been installed prior
to LANE client drivers. If no CIP drivers have been
installed, follow the procedures in the previous
section to install them.
LANE client drivers are installed from the Network Settings dialog
box in the Control Panel. Up to 4 drivers (numbered 0 to 3) can be
installed at one time. You must install the first driver (0) before you
can install an additional driver.
Installing a LANE Client Driver
1
In the Program Manager’s Main group window, select the
Control Panel icon.
2
Select the Network icon.
3
Select Add Adapter from the Network Settings dialog box.
4
Select <Other> Requires disk from manufacturer from the
bottom of the Network Adapter Card dr op -down list, an d the n
select Continue.
5
Insert the LAN Emulation Client diskette in the diskette drive.
6
Type the drive letter of the diskette drive that contains the LAN
Emulation Client d is k e t te , an d th e n se l ect OK.
7
Select Adaptec Inc. ATM LANE Adapter, and then select OK.