8-7
Installing ATM Software for Novell NetWare
3
Add the following command as the last line of the file:
sys:\system\atms.ncf
4
Save and exit the file.

Automating ATM Software Installation

To automate Adaptec ATM software installation, you must modify
your autoexec.ncf file as follows:
1
Type the following command at the system prompt, and press
Enter:
load edit
2
In the File Edit screen, type the following command at the
system prompt and press Enter:
sys:\system\autoexec.ncf
The File SYS:\SYSTEM\AUTOEXEC.NCF screen appears.
3
Add the following command line:
search add a:
4
Save and exit the file.
Installing, Configuring, and Loading Adaptec ATM Software for NetWare 4.1
This section contains instructions for installing and config uring
Adaptec ATM software for Novell NetWare 4.1 and for loading the
software automaticall y on system boot.

Installing and Configuring the ATM Software While

Installing NetWare 4.1

To install the Adaptec ATM software while installing Novell
NetWare 4.1
1
Begin the procedure for installing Novell NetWare 4.1, as
explained in your NetWare documentation.
2
When the Choose the Server Drivers - Network Driver screen
appears, press Insert to install an unlisted driver.