1-1
1
▼▼▼▼
Getting Started
This document contains information on installin g and configuring
the Adaptec® ANA™-5910/5930/5940 adapters. These adapters
provide the interface between your computer’s PCI bus and a
network that uses Asynchronous Transfer Mode (ATM). Procedures
in this document describe installing the a dapter, installing and
configuring the adapter drivers, and performing administrative and
management functions for your ATM network.
Note:
The procedures in this document assume that you are
connecting the adapter to an external ATM local area
network (LAN) switch.

System Requirements

Certain hardware and software components are required to use the
ANA-5910/5930/5940 adapters.

Hardware Requirements

The minimum hardware s ystem requirements are a s follows:
■PCI rev. 2.0-compl iant computer with +5V PCI slots for the
ANA-5910 and +5V/+12V PCI slots for the ANA-5930/5940
■An available PCI bus master slot