6-1
6
▼▼▼▼
Installing ATM Softwar e for DOS/Windows 3.1
This chapter describes how to install and con figure Adaptec ATM
software for DOS/Windows 3.1. In addition, this chapter pro vi des
information on using frame types with Novel l NetWare.

Configuring the Novell NetWare Client Kit for

DOS/Windows

This section explains how to configure the No vell NetWare Client
Kit for DOS/Windows to support Adaptec’s ATM software.
To configure the NetWare Client Kit
1
Start the Novell NetWare Client installation, as explained in
your Novell NetWare user documentation.
2
In the NetWare Client Install screen, select OTHER DRIVERS
when prompted to “Select the driver for your network board,”
and then press Enter.
3
Remove the [NWClient] diskette from the floppy disk drive,
insert the ANA-59x0 DOS WIN diskette, and press Enter.
4
From the Network Board screen, select DOS ODI2NDI
Enabler.
There are no configuration options for this driver.
5
Complete the Novell NetWare installation.
6
Reboot your system.