4-7
Installing ATM Version 4.0x Software for Windows NT
Installing The ATM Utilities
To install the Adaptec ATM Utilities
1
Select Start, Settings, then Control Panel.
2
From the Control Panel window, click on the Network icon.
3
Select the Protocols tab from the Ne t w or k Settings dialog box.
4
Click the Add button to add a device driver.
5
Insert the ALANE Utilities for Windows NT diskette in the
diskette drive and select Have Disk.
6
Type the drive letter of the diskette, and select OK.
7
Select Adaptec ATM Utilities, and select OK.The following
message appears in the Setup Message dialog box:
Install the NT SNMP service and use configure opt ion to
configure Adaptec ATM SNMP
Select OK. The installation stops, and the Network Settings
dialog box appears.
8
Select Close.