5-27
Installing ATM Version 2.0x Drivers for Windows NT
aatmcnfg.exe
The
aatmcnfg.exe
utility is used for configuring the
atmo.sys
driver.
The following is the syntax for using this utility :
aatmcnfg [-f ConfigFile] -[x n] -[s | d | p | q | a]
Options:
Use the -q option only if you do not want to use SVCs and if you do
not want to register with a switch, as in back-to-back connections or
when running diagnostics. Use the -a option if your switch does not
support address registrat ion. Use the -f ConfigFile option to start the
atmo.sys
driver with a database file other than the default
base.db
,
for example,
trial.db.
Note:
When you run the utility
aatmcnfg
without options,
the driver registers with the switch. If the driver fails to
register with the switch, enter aatmcnfg -s to stop the driver
then try starting it again.
aatmdiag.exe
The
aatmdiag.exe
utility is used for diagnosing the ATM adapter.
The following is the syntax for using this utility :
aatmdiag [-option “[command][; command]”]1
1 Use the -f option and the file name if you created a batch file with the tests
listed in the file.
-s shutdown
-d debug
-p print status
-q no signalling
-a no address registration
-x n delete PVC channel n