4-11
Installing ATM Version 4.0x Software for Windows NT
8
Enter Bus Type and Number fr om the dialog box and select
OK.
9
Select OK from the Network Control P anel window.
10
If IPX/SPX is installed on your workstation, the NWLink IPX/
SPX Protocol Configuration dialog box appears. If IPX/SPX is
not installed, this dialog box will not appear.
■Select the adapter that will support the IPX/SPX protocol
from the Adapter drop-down list.
■Select Auto Detected from the Frame Type drop-down
list.
■Select OK.
11
If TCP/IP is installed on your workstation, the TCP/IP
Configuration dialog box appears, requiring that you set other
protocol addresses and information. Refer to your Windows
NT user documentation for information about setting up your
TCP/IP configuration. When you have entered the necessary
TCP/IP data, select OK. If you do not have TCP/IP i nstalled,
these configuration screens will not appear.
Type Set the Typ e to PCI when using the
Adaptec card. Default is ISA.
Number Select the bus number slot that the
card is plugged into. The total number
available depends on your hardware
configuration.