4-13
Installing ATM Version 4.0x Software for Windows NT
Installing The ATM Utilities
To install the Adaptec ATM Utilities
1
In the Program Manager’s Main group window, select the
Control Panel icon.
2
Select the Network icon.
3
Select Add Adapter from the Network Settings dialog box.
4
Select <Other> Requires disk from manufacturer from the
bottom of the Network Adapter Card dr op -down list, an d the n
select Continue.
5
Insert the ALANE Utilities for Windows NT diskette in the
diskette drive.
6
Type the drive letter of the diskette drive that contains the
diskette with the ATM utilities, and then select OK.
7
Select Adaptec ATM Utilities, and then select OK.The
following message appears in the Setup Message dialog box:
Install the NT SNMP service and use configure opt ion to
configure Adaptec ATM SNMP
When you select OK, the installation stops, and the Network
Settings dialog box appears.
8
Select Close.