8-6

ANA-5910/5930/5940 User’s Guide
5

Save and exit the file.

Automatically Loading the ATM Driver

To automatically load the Adaptec ATM driver at system boot, you

must modify your autoexec.ncf file as follows:

1

Type the following command at the system prompt, and press

Enter:

load edit

2

In the File Edit screen, type the following command at the

system prompt and press Enter:

sys:\system\autoexec.ncf

The File SYS:\SYSTEM\AUTOEXEC.NCF screen appears.

1 47007900000000000000000000
2 00a03e00000100
les_nw Network
NSAP; up
to 26
characters
Specifies the first 13-byte
network portion of the
NSAP address for the
LES. This value is
required if
LES_REQ=yes.
les_esi ESI
NSAP; up
to 14
characters
Specifies the last 7-byte
end system identifier
(ESI) portion of the NSAP
address for the LES. This
value is required if
LES_REQ=yes.
lecs_nw 1Well-
known
LECS
address
Network
NSAP; up
to 26
characters
Specifies the first 13-byte
network portion of the
NSAP address for the
LECS.
lecs_esi 2Well-
known
LECS
address
ESI
NSAP; up
to 14
characters
Specifies the last 7-byte
ESI portion of the NSAP
address for the LECS.
elan_name default Up to 25
characters Specifies the ELAN name
for the LES.
Parameter Default
Value Possible
Values Description