ADC CRA-C Item, Table, Function, Description

Install the Megabit Modem CRA-C

Table 1. Cables for Megabit Modem CRA-C

Item	Description	Function
Straight-through	Black unshielded	Connects the Megabit Modem
Category 3 cable	twisted-pair (UTP)	CRA-C Ethernet MDI-X port
	cables terminated with	to a network device with an
	RJ-45 connectors.	MDI port.
Cross-over	Yellow UTP cable	Connects the Megabit Modem
Category 5 cable	terminated with RJ-45	CRA-C Ethernet MDI-X port
	connectors.	to a network device with an
		MDI-X port.
ADSL cable	Gray UTP cable	Connects the Megabit Modem
	terminated with RJ-11	CRA-C to the ADSL line.
	and RJ-45 connectors.
Console cable	Flat, silver, eight-wire	Plugs into the Console port to
	cable with RJ-45	connect the Megabit Modem
	connectors at each end.	CRA-C to an ASCII terminal.
		Do not use as a 10BASE-T
		Ethernet cable.

Console adapter	A rectangular DB-9 (F)
	to RJ-48 adapter with
	two captive mounting
	screws.

Optional. Connects the Megabit Modem CRA-C to an ASCII terminal for configuration and viewing status.

Power supply	An AC to DC power
	supply that plugs into
	the power outlet.

Provides primary power to the Megabit Modem CRA-C and establishes a safety ground.

Do not tamper with the power supply safety prong. It is a critical element for the secondary lightning protection provided within the Megabit Modem CRA-C. If you tamper with the safety prong, you risk serious injury.

8 Megabit Modem CRA-C User Manual