Install the Megabit Modem CRA-C

Install the Megabit Modem CRA-C

Complete the steps in the order listed to install the Megabit Modem CRA-C:

•connect to the ADSL line

•connect to the data network

Connect to the ADSL Line

The Megabit Modem CRA-C requires a single pair of telephone wires to connect the subscriber to the service provider. One wire is the Tip

and the other is the Ring. See Table 4 for pinouts. Connect the Tip and Ring wires to your Megabit Modem CRA-C:

1Plug the RJ-45 connector of the ADSL cable (gray) into the ADSL port on the Megabit Modem CRA-C rear panel (Figure 4).

2Connect the RJ-11 connector to the ADSL line.

Figure 4. Connecting to the ADSL Line

12

Megabit Modem CRA-C User Manual