Configure and View Status
Configure as a Router
Configure Router parameters at the Bridge/Router Menu. Router configuration options are maintained and restored through the system's local service port and are kept in NVRAM to be used in subsequent initializations.
1Type 1 at the Bridge/Router Menu to display the Bridge/Routing Configuration Menu.
07/02/97 | PAIRGAIN | TECHNOLOGIES | 08:54:33 |
ADSL MEGABIT | MODEM TERMINAL | 01.01 |
BRIDGE/ROUTING CONFIGURATION MENU
MODE SETTING | 1. | BRIDGE/ROUTER | MODE | ROUTER | ||
IP STATIC ROUTING | DESTINATION |
| SUBNET MASK | GATEWAY ADDRESS | ||
TABLE | 2. | DEFAULT |
|
|
| 192.168.240.1 |
| 3. | 192.168.242.0 | 255.255.255.0 | 172.16.100.2 | ||
| 4. | 0.0.0.0 |
| 0.0.0.0 |
| 0.0.0.0 |
| 5. | 0.0.0.0 |
| 0.0.0.0 |
| 0.0.0.0 |
LAN PORT CONF. | 6. | LAN IP ADDR: |
| 192.168.240.10 | ||
| 7. | LAN SUBNET MASK: | 255.255.255.0 | |||
LINE PORT CONF. | 8. | LINE IP ADDR: |
| 172.16.100.1 | ||
| 9. | LINE SUBNET MASK: | 255.255.255.0 | |||
OTHER CONF. | A. BOOT SERVER IP ADDR: | 0.0.0.0 | ||||
| B. BOOT MODE: |
|
| LOCAL | ||
| C. IMAGE FILE | NAME: |
|
| ||
| D. IMAGE LOAD | MODE: | LOCAL | |||
| E. PACKET ENCAPSULATION: | HDLC |
| |||
C(o)nfirm (U)ndo (R)eturn (M)ain
ENTER
2Type 1 , press the spacebar to toggle to Router, then press
ENTER . At the prompt, Save current setting (Y/N), type Y to display the screen below. Ensure the mode setting is Router. The following screen shows configuration for a Megabit Modem
34 | Megabit Modem |