Configure and View Status
Configure as a Bridge
Configure Bridge parameters at the Bridge/Router Menu. Bridge configuration options are maintained and restored through the system's local service port and are kept in NVRAM to be used in subsequent initializations.
1Type 1 at the Bridge/Router Menu to display the Bridge Configuration Menu.
2Type 1 , press the spacebar to toggle to Bridge, then press
ENTER . At the prompt, Save current setting (Y/N), type Y to display this screen. Ensure the mode setting is Bridge.
07/02/97 | PAIRGAIN TECHNOLOGIES | 08:54:11 |
ADSL MEGABIT MODEM TERMINAL | 01.01 |
BRIDGE CONFIGURATION MENU
SETTINGS | 1. BRIDGE/ROUTER MODE | BRIDGE | |||
| 2. | LOCAL IP ADDR | 192.168.240.10 | ||
| 3. | LOCAL SUBNET MASK | 255.255.255.0 | ||
| 4. | BOOT | ROUTER IP ADDR | 0.0.0.0 | |
| 5. | DEFAULT ROUTER IP ADDR | 192.168.240.1 | ||
| 6. | SPANNING TREE | DISABLE | ||
| 7. | BOOT | SERVER IP ADDR | 0.0.0.0 | |
| 8. | BOOT | MODE |
| LOCAL |
| 9. | IMAGE | FILE | NAME |
|
| A. IMAGE | LOAD | MODE | LOCAL | |
| B. PACKET ENCAPSULATION | HDLC | |||
(C)onfirm (U)ndo (R)eturn (M)ain
ENTER
3Do the following for each Bridge Configuration option you want to change:
_ Type the number or letter of the option you want to configure.
_ Select, using the spacebar, or type in the appropriate information for each option as indicated in Table 10 then press ENTER .
Megabit Modem | 31 |