Configure and View Status

Reset the Ethernet Bridge

Changes you make to the Ethernet bridge through the Bridge/Router Configuration menus (pages 31 and 37) and SNMP Configuration menu (page 38) write immediately to flash memory when changes are confirmed. However, they do not take effect until the Megabit Modem CRA-C Ethernet bridge is reset. The Reset option causes the bridge to reboot with the new configuration.

Reset the Megabit Modem CRA-C Ethernet bridge:

1Type 3 at the Main Menu to display the Bridge/Router menu.

07/02/97

PAIRGAIN TECHNOLOGIES

08:55:55

 

ATU-C ADSL MEGABIT MODEM TERMINAL

01.01

BRIDGE/ROUTER MENU

-----------------------------------------------------------

ETHERNET

MAC ADDRESS:

00-20-A7-20-68-F2

 

10 BASE-T LINK STATUS:

LINK UP

 

EBM STATUS:

READY

-----------------------------------------------------------

SELECTIONS

1. BRIDGE/ROUTER CONFIGURATION

2.SNMP CONFIGURATION

3.STATISTICS

-----------------------------------------------------------

SETTINGS 4. RESET

(M)ain

ENTER CHOICE-->

WARNING: This will bring down all connections. Are you sure? (Y/N)

2Make all changes in the Bridge/Routing Configuration menu and the SNMP Configuration menu.

3Type 4 to select Reset.

4Type either Y for yes to Reset or N for no to cancel Reset.

When you select Y to Reset, the Megabit Modem CRA-C Ethernet link is dropped, the bridge is reset, then the Ethernet link is re-established. The changes made to the Ethernet bridge are now effective.

40

Megabit Modem CRA-C User Manual