Configure and View Status
|
|
| Table 11. Router Configuration | |
|
|
|
|
|
| Type | For | Function | |
| No. | Option |
|
|
|
|
|
|
|
2 | Default | Contains the address of the default gateway | ||
|
|
|
|
|
3 | IP Static | Consists of the Destination, Subnet Mask, and | ||
4 | Routing | Gateway. Must be configured for the Megabit Modem | ||
5 | Table | |||
|
|
| format for each field and the default. | |
|
|
|
|
|
6 | LAN IP | Input the network address of the Megabit Modem | ||
|
| Addr | ||
|
|
| mapping to function properly. 0.0.0.0 is the format for | |
|
|
| the field. | |
|
|
|
|
|
7 | LAN Subnet | Input the subnet mask of the Megabit Modem | ||
|
| Mask | ||
|
|
| function properly. 0.0.0.0 is the format for the field. | |
|
|
| 255.255.255.0 is the default. | |
|
|
|
|
|
8 | Line IP | Input the network address of the Megabit Modem | ||
|
| Addr | ||
|
|
| to function correctly. | |
|
|
|
|
|
9 | Line Subnet | Input the subnet of the Megabit Modem | ||
|
| Mask | port. Necessary for static IP mapping to function | |
|
|
| correctly. 255.255.255.0 is the default. | |
|
|
|
|
|
| A | Boot Server | Gives the address of the TFTP server. The default is | |
|
| IP Addr | the value of the BOOTP server if you have not | |
|
|
| configured a different TFTP server address on the | |
|
|
| BOOTP configuration file. | |
|
|
|
|
|
| B | Boot Mode | Describes the manner in which the Megabit Modem | |
|
|
| ||
|
|
| during | |
|
|
| remote loading of Boot information (IP configuration | |
|
|
| only). Local Boot configuration is contained in | |
|
|
| NVRAM. The Megabit Modem | |
|
|
| configuration using values found in NVRAM when | |
|
|
| Local (the default) is selected. When Network is | |
|
|
| selected, the Megabit Modem | |
|
|
| configuration over the network via a BOOTP server. | |
|
|
|
|
|
|
|
| (continued) | |
|
|
|
|
|
36 |
| Megabit Modem |