Configure and View Status
Configure SNMP
Configure SNMP parameters and trap addresses at the SNMP Configuration menu.
1Type 2 at the Bridge/Router Menu to display the SNMP Configuration Menu.
07/02/97 | PAIRGAIN TECHNOLOGIES | 08:53:26 |
| 01.01 |
SNMP CONFIGURATION MENU
SETTINGS | 1. SNMP READ ONLY COMM STRING: | public | ||
| 2. | SNMP READ WRITE | COMM STRING: | private |
| 3. | AUTHENTICATION TRAP STATUS: | ENABLE | |
| 4. | TRAP RECEIVER 1 | IP ADDRESS: | 0.0.0.0 |
| 5. | TRAP RECEIVER 1 | COMM STRING: | public |
| 6. | TRAP RECEIVER 2 | IP ADDRESS: | 0.0.0.0 |
| 7. | TRAP RECEIVER 2 | COMM STRING: | public |
(C)onfirm (U)ndo (R)eturn (M)ain
ENTER
2Do the following for each SNMP Configuration option you want to change:
_ Type the number of the option you want to configure.
_ Select, using the spacebar, or type in the appropriate information for each option as indicated in Table 12 then press ENTER .
38 | Megabit Modem |