Configure and View Status

How to Configure a Remote Unit

From the Megabit Modem CRA-C, you can view system parameters and set configuration options for the remote Megabit Modem CRA. The remote console menu header reflects the remote unit as ATU-R. This shows that the console program is physically connected to the unit at the service provider site (ATU-C), but is virtually configuring the unit at the subscriber site (ATU-R).

At the Main Menu, type 4 for Remote Logon to display the configuration and status menus for Megabit Modem CRA (remote ATU-R).

07/02/97

PAIRGAIN TECHNOLOGIES

08:43:18

ATU-C ADSL MEGABIT MODEM TERMINAL

01.01

MAIN MENU

1.SYSTEM STATUS AND CONFIGURATION

2.ADSL MENU

3.BRIDGE/ROUTER MENU

4.REMOTE LOGON

Q.LOGOUT

ENTER CHOICE-->

The following Remote Logon screen is displayed.

07/02/97

PAIRGAIN TECHNOLOGIES

08:42:28

ATU-R ADSL MEGABIT MODEM TERMINAL 01.01

LOGON PASSWORD>

Optionally, you can press Ctrl T at the logon screen or at any menu shown in the menu tree (Figure 8) to toggle between the local and remote Megabit Modems.

Megabit Modem CRA-C User Manual

23