ADC CRA-C No, Type, Function, For Option

ENTER .

Configure and View Status

3Do the following for each system setting option you want to change:

_

_

Type the number of the option you want to configure.

Type the appropriate information for each option as indicated in Table 7 then press

Table 7. System Configuration Options

	Type	For Option	Function
	No.
1		Change	Type the new time in the 24-hour clock format
		System Time	hh:mm:ss at the prompt. The new time shows in the
			upper right corner of the screen.
2		Change	Type the month, day, and year in the mm/dd/yy format
		System Date	at the prompt. The new date shows in the upper left
			corner of the screen.
3		Change	Enter a maximum of eight characters. To enter a new
		Password	password, do the following:
			_	Type 3 and the message Creating user
				password, press ENTER displays. Press
				ENTER .
			_	When prompted Please enter the new
				password, type the new password then press
				ENTER . An * appears on the screen as you type
				each character of the password.
			_	When prompted Please retype the
				password, type the new password again then
				press ENTER . You get this confirmation:
				Password accepted.
			If you change the default password, write it down and
			save it in a secure place. You cannot recover the
			password if it is forgotten.
4		Factory	Resets all ADSL transceiver and Ethernet bridge values
		Default	to default. After you type 4 , a message warns you
		Configuration	that you will reset these values. Select either N (no) or
			Y (yes) to reset. When you select Y, the modem
			restarts. Press the spacebar several times to autobaud.
			You must then log in again. All ADSL transceiver and
			Ethernet bridge values are now at default values,
			including the password.
	Megabit Modem CRA-C User Manual			25