PROGRAMMING SPEED
The maximum time required for the output voltage or current to change from an initial value to within a tolerance band of the newly programmed value following the onset of a step change in the programming input signal. Because the programming speed depends on the loading of the supply and on whether the output is being programmed to a higher or lower value, programming speed is usually specified at no load and full load and in both the up and down directions.
PROGRAMMING SPEED WAVEFORMS
REMOTE PROGRAMMING (REMOTE CONTROL)
Control of the regulated output voltage or current of a power supply by means of a remotely varied resistance or voltage. The illustrations below show examples of constant voltage remote programming. CC applications are similar.
REMOTE PROGRAMMING USING RESISTANCE CONTROL
REMOTE PROGRAMMING USING VOLTAGE CONTROL
14
