Flow 2
(All units: Static IP addresses are set)
* This is the outline of setting flow. Also make the detailed settings on each setting window referring to the corresponding pages.
START
Write down the MAC addresses of all the IP units to be used in the system in advance by using the “Setting Information Memo” (→P. 30) etc.
*The MAC address is labeled on each unit.
Decide the static IP address for each IP unit.
Make the [Network setting: Individual] settings on each IP unit individually. (→ P. 16)
Connect the units and the PC used for settings to the network, and then turn them on respectively.
Confirm the [Network setting: Common] settings on the IP host unit. (→ P. 16)
*Confirm that the multicast addresses and/or port numbers do not overlap those of other manufacturer’s network devices connected to the same network.
Add IP units you will use in the system at [IP unit registration] on the IP host unit. (→ P. 19)
(The selected unit is added in the list whenever selected.)
: Settings on the IP host unit
: Settings on the IP client units
For the IP host unit
Connect the IP host unit and the PC used for settings directly, and then turn them on. After a while, access "https://192.168.0.40/" from the browser on the PC. (→P. 14)
NOTES:
•When connecting a PC to the IP unit directly, use an Ethernet crossover cable.
•If a warning dialog box for security or guarding against virus programs appears when accessing the web browser, give permission.
(Log in.)
Make the [Network setting: Individual] settings on the IP host unit. (→ P. 16)
*Set it as "Host unit".
*Set the static IP address to the IP host unit.
Update the system at [Updating the system]. (→ P. 28)
If you will connect your site with remote sites, make the remote site connection settings. (→ P. 12)
Make the other system settings. (→ P.
For each IP client unit
Connect an IP client unit and the PC used for settings directly, and then turn them on. After a while, access "https://192.168.0.40/" from the browser on the PC. (→P. 14)
NOTES:
•When connecting a PC to the IP unit directly, use an Ethernet crossover cable.
•If a warning dialog box for security or guarding against virus programs appears when accessing the web browser, give permission.
(Log in.)
Make the [Network setting: Individual] settings on the 
IP client unit. (→ P. 16)
*Set it as "Client unit".
*Enter the IP address of the IP host unit.
* Set the static IP address to the IP client unit.
Update the system at [Updating the system]. (→ P. 28)
10
