Aiphone FK1629 B 0811YZ operation manual Flow

Flow 1

(IP host unit: A static IP address is set,

IP client units: IP addresses are assigned by the DHCP server automatically)

* This is the outline of setting flow. Also make the detailed settings on each setting window referring to the corresponding pages.

GETTING

START

Write down the MAC addresses of all the IP units to be used in the system in advance by using the “Setting Information Memo” (→P. 30) etc.

*The MAC address is labeled on each unit.

Decide the static IP address for the IP unit to be used as the IP host unit.

*Use an address out of the range of DHCP assignment for the IP host unit in order to prevent the address for the IP host unit being assigned to another IP client unit by an influence of the turn-on order between the IP host unit and the router (that has a DHCP server function) etc.

(When making the IP host unit settings after connecting the units to the network)

:Settings on the IP host unit

:Settings on the IP client units

STARTED SETTING THE SYSTEM

(When making the IP host unit settings before connecting the units to the network)

Connect the IP host unit and the PC used for settings directly, and then turn them on. After a while, access "https://192.168.0.40/" from the browser on the PC. (→P. 14)

NOTES:

•When connecting a PC to the IP unit directly, use an Ethernet crossover cable.

•If a warning dialog box for security or guarding against virus programs appears when accessing the web browser, give permission.

(Log in.)

Make the [Network setting: Individual] settings on the IP host unit. (→ P. 16)

*Set it as "Host unit".

*Set the static IP address to the IP host unit.

Connect the units and the PC used for settings to the network, and then turn them on.

Search for the IP address of the IP host unit from the MAC address of the IP host unit by using IS_IPSEARCH.exe (in the CD-ROM included with the IP master station (IS-IPMV)). (If the address does not appear, repeat this step until it appears.) Then access the address from the browser on the PC. (→P. 14)

*This address is the temporary one for the initial setting.

(Log in.)

USING THE SYSTEM

APPENDIX

Update the system at [Updating the system]. (→ P. 28)

Connect the units and the PC used for settings to the network, and then turn them on.

(IP addresses are assigned to the IP client units by the DHCP server automatically.)

Search for the IP units (other than PC master stations) you will use in the system at [IP unit search] on the IP host unit, and open the setting window for each IP unit. (→ P. 17)

Make the [Network setting: Individual] settings on the IP client units. (→ P. 16)

*Set them as "Client unit" (if they are not set as "Client unit").

*Enter the IP address of the IP host unit.

*Select "DHCP" for acquiring IP addresses (if "DHCP" is not selected).

Update the system at [Updating the system]. (→ P. 28)

Confirm the [Network setting: Common] settings on the IP host unit. (→ P. 16)

*Confirm that the multicast addresses and/or port numbers do not overlap those of other manufacturer’s network devices connected to the same network.

Make the [Network setting: Individual] settings on the IP host unit. (→ P. 16)

*Set it as "Host unit".

*Set the static IP address to the IP host unit.

Update the system at [Updating the system]. (→ P. 28)

Add IP units you will use in the system at [IP unit registration] on the IP host unit. (→ P. 19)

If you will connect your site with remote sites, make the remote site connection settings. (→ P. 12)

Make the other system settings. (→ P. 17-28)

9