MAINTENANCE
This section describes the use of functions for the system maintenance. These functions are available on the web server.
Initializing the system [Initialization]
You can reset the system settings to factory default.
1 Access the web browser and log in. (→P. 14)
2 Click Initialization in the table of contents.
3 Click Initialization .
Downloading system log [System log]
You can acquire the system operation log.
1 Access the web browser and log in. (→P. 14)
2 Click System log in the table of contents.
3 Click Download to acquire the log from the system. 4 Confirm the log, and save it as needed.
NOTE:
The log is overwritten constantly from the oldest records.
Updating the firmware [Firmware update]
■Downloading updated firmware data
Please access our web page at http://www.aiphone.net/ and download the firmware data on the PC to update the system. For the download procedure, see the instructions on our web page.
1 Access the web browser and log in. (→P. 14)
2 Click Firmware update in the table of contents.
3 Click Update .
Another window opens.
4 Click Browse... and select the target firmware.
5 When the firmware is displayed in the window, click Upload .
When “Update firmware.” is displayed, the update process is complete.
NOTES:
•If the power is turned off while it is writing, the product will malfunction.
•The system may not operate normally while updating the firmware.
NOTE:
If the update fails, try again.
Referring to the troubleshooting guide [Troubleshooting]
1 Click Troubleshooting in the table of contents.
The following information appears in the window.
•Information about the
•Supported characters and symbols
Registering your system [Registration]
1 Click Registration in the table of contents.
2 Click Register to open the registration window, and then register your system on the window.
*If you use an
GETTING STARTED SETTING THE SYSTEM USING THE SYSTEM
APPENDIX
29
