The following shows the setting procedure for the items of each title.
Refer to “SETTING LIST” (→P.
Making network settings to each IP unit [Network setting: Individual]
Make the settings for network to each IP unit connected to the system according to your requirements.
1 Click Network setting: Individual in the table of
contents.
2 Make the settings on the following items displayed in the setting window.
•[Host unit setting]:
Set this unit as either “Host unit” or “Client unit”. When set to “Client unit”, also enter the IP address of the IP host unit.
•[System name]: Required
When “Host unit” is selected at [Host unit setting], it is required to enter a name for this system.
Selecting the network setting method
Set a (static) IP address to this unit. Select the method for acquiring a (static) IP address between [DHCP] and [Static IP Address].
•[DHCP]:
Check this when you will acquire an IP address with DHCP.
*A DHCP server (or a router) is required to acquire an IP address with DHCP. A router may not have the setup function depending on some models. For information about setting a router, see the instruction manual for the router.
•[Static IP Address]:
Check this when you set the static IP address manually, and then enter the static IP address suitable for the network you are using, subnet mask, etc.
*It is required to enter the static IP address and subnet mask.
•[Unit name]:
Enter a name for this unit.
*This name is used for searching for this unit in the network. If not named, this unit is recognized only by the unit (station) type and MAC address.
•[Connection port], [Connection Password]: Required Enter the port number for controlling communication and the password for security. Use the same port number and password among the IP host unit and IP client units within the site.
NOTES:
•The IP host unit must not have an IP address identical to the IP address of a remote site’s IP host unit.
•The items that cannot be entered or selected are grayed out.
3 Click Temporarily stored to save the current setting results temporarily.
*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.
16
4 When the settings on this window have finished, update the system from [Updating the system]. (→P. 28)
Making network settings for the whole system [Network setting: Common]
Make the network settings for the whole system on the web browser of the IP host unit.
1 Click Network setting: Common in the table of
contents.
2 Make the settings on the following items displayed in the setting window.
•[UPnP]:
If you do not use UPnP, set [UPnP] to OFF.
•[Global IP address]:
When [UPnP] is set to OFF, enter the static global IP address of the router for use in your site.
•[Multicast address 1 – 5]: Required
Enter the multicast addresses for the following:
1:For sound communication for paging between sites
2:For sound communication for paging in your site
3:(Not available)
4:For video communication in your site
5:For video communication between sites
*Do not use multicast addresses that overlap those of other devices connected to the same network.
•[Audio/video port]: Required
Enter the port numbers used for audio and video communication.
*Do not use port numbers that overlap those of other devices connected to the same network.
3 Click Temporarily stored to save the current setting results temporarily.
*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.
