Making detailed settings to stations [System setting – Advanced station settings]

Make detailed settings for the registered stations. The settings can be made to a station individually, or multiple stations of the same type at a time. The setting items differ from the station type. First select a station (or stations), and then open the “Advanced settings” window to make the settings.

Basic setting procedure

Click Advanced station settings in the table of contents.

Click to check the station(s) where detailed settings are to be made.

*Multiple stations of the same type can be set together.

*All stations of the same type can be selected by clicking the corresponding button under [Select all by type].

Click Advanced settings .

The “Advanced settings” window for the selected station type opens.

Make the settings in the displayed windows.

For door stations

The right column of this page

For master stations

P.22

When you have finished making all the detailed settings:

Click Temporarily stored to save the current setting results temporarily.

*If you wish to cancel the setting results you have made, click a title in the table of contents or “Refresh” in the web browser menu.

Making detailed settings to door stations

The following setting item buttons are displayed in the “Advanced settings” window.

A

B

*Click either the button A or B to open the corresponding setting window, and then make the settings in the displayed window(s). See the detailed

instructions for A or B below.

*Click Close to close the current window and return to the previous window.

ASettings on [Called stations] setting window

Set the master station(s) in your site and/or a remote site that is (are) to be called from the selected station(s).

*Up to 20 master stations in your site can be set. Or up to 19 master stations in your site and a remote site (up to 20 master stations are to be set at the remote site) can be set.

1 Select the “Call priority” from the pull-down menu.

2 Click Reference to open another window, then check the target master stations, and then click Close to return to the previous window.

The selected master stations are added and displayed in the list.

*Click Remote sites to open another window for selecting the remote site as the target to be called from the selected station(s).

*To delete a station (or stations) and/or remote site from the list, check the targets in the list and click Delete .

3 Repeat step 2 to add more master stations.

4 Click Close to close the current window and return to the previous window.

GETTING STARTED SETTING THE SYSTEM USING THE SYSTEM

APPENDIX

21

Page 21
Image 21
Aiphone FK1629 B 0811YZ operation manual Basic setting procedure, Making detailed settings to door stations