Airlink RJ-11 Port Utility, Add Unlitsed Port Server B. Click on Assign IP Address, Installation

Installation

3.

optional

FIGURE 6. Port Utility

Configure a temporary IP address for configuring the Host RJ-11 IP Gateway.

A.Double-click on the [Click to Assign] for the discovered device (if an IP addess is listed in that column, double-click on the IP address if you need to change it).

B.Type in an IP address. It’s recomended that you use 192.168.1.3.

C.Press Enter to save the address.

If the Host RJ-11 IP Gateway is not displayed in step 2, you will need to manually add the device.

A.Click on Add Unlisted Port Server.

FIGURE 7. Add Unlitsed Port Server

B.Click on Assign IP Address.

C.Enter the MAC address found on a sticker beside the Ethernet port on the Ethernet Address line.

D.Type in the desired IP Address as noted in step 3 above.

E.Click Assign IP Address.

Host RJ-11 IP Gateway User Guide, version 10