Airlink manual Port Settings, AT Commands, Host RJ-11 IP Gateway User Guide, version

AT Commands

Format	Example	Notes
Fixed format	aaabbbcccddd or	12 digit IP address, each number is three decimal
	192168001001	digits with leading zeroes
Optional port	:xxxxx	Decimal TCP port number from 0..65535
number

•If no phone number (IP address) is specified, the Destination IP Address configured for the port is used.

•If no port number is specified, the Destination TCP Port configured for the port is used.

•The source port for the TCP connection follows the Source TCP Port configured for the port.

Port Settings

Most of the serial port settings (like baud rate) are controlled by the configured port settings on the device server. Modem emulation does not support changing these from AT commands.

Host RJ-11 IP Gateway User Guide, version 44