Mixer, Submix 1 to 8, Out 1,2 to Out 15,16. The outputs that are not available in your audio hardware will show up as greyed out. If a loaded project has outputs routed that don’t exist on your audio hardware, these will shown in red.
This can be done in Program Mixer mode by clicking on the arrow above the first insert effect slot.
Click on the SEND button of the desired channel. Click on one of the SEND knobs of the desired channel and edit its value with your computer mouse. Alternatively, you can use your mouse scroll wheel.
ÂTo use a Pad send effect, you have to load an effect into the corresponding send effect slot to the right of the Track Mixer.
Master effects:
The following paragraph explains how to load and edit Master effects.
XTo load a master insert effect, press SHIFT + SEQ EDIT/EFFECTS on your MPC hardware. First press the F1 (Master) button and after that click on the F4 (Insert) button. Use the cursor to navigate to the desired insert effect slot. With the
XTo load an send effect for the Master chain, click on the F5 button (Send). Use the cursor to navigate to the desired send effect slot. With the
In the MPC software, click on the Track Mixer tab in the Upper section. The Master effect section is located on the right end of the Track Mixer.
Click on the arrow of the master insert effect slot you want to assign an effect to. A
95
