Chapter 6 - Advanced Applications
Generator Type | Page | Display | Description |
Low Freq. | 5 | LFO Cycle Time: 0.14- | This is the time it takes |
Oscillator |
| 35.14 Seconds | for the LFO to make one |
|
|
| complete cycle |
Footswitch | 5 | Footswitch Source: | This is the footswitch |
|
| Advance/Bypass | that is monitored for |
|
|
| Modulation cues. This |
|
|
| setting overrides the |
|
|
| default function of the |
|
|
| footswitch (i.e. The |
|
|
| effect wonÕt bypass if |
|
|
| the Bypass Footswitch |
|
|
| is assigned as a |
|
|
| modulator) |
| 6 | Action Type: | This specifies the |
|
| Momentary/Latched | footswitchÕs function: |
|
|
| either active only when |
|
|
| stepped on or as an |
|
|
| on/off control |
| 7 | Attack Time: | This is the time the |
|
| Seconds | modulator takes to ramp |
|
|
| up to the peak value |
| 8 | Decay Time: | This is the time the |
|
| Seconds | modulator takes to ramp |
|
|
| down to zero modulation |
100 | Q20 Reference Manual |