Advanced Applications - Chapter 6

➄Turn the [VALUE/ENTER] knob to select a program change number from 000Ð127 to be re-mapped.

➅Press [PAGE >] to advance the cursor to the second field in the display.

PROGRAM TABLE: 000 = User0-00

➆Use the [VALUE/ENTER] knob to select a Q20 Program for the selected MIDI program change message to be re-mapped to (Preset 00Ð99 or User 0-00Ð1-99).

SysEx Storage

To send and receive program information via SysEx dumps using a computer, or some other SysEx storage device (such as the Alesis NanoTracker), or another Q20:

➀Connect the other deviceÕs MIDI OUT to the Q20Õs [MIDI IN].

➁Connect the Q20Õs [MIDI OUT] to the other deviceÕs MIDI IN. This provides two-way communication between the devices.

➂Press [MIDI].

The [MIDI] LED will light.

➃Press [< PAGE] to select MIDI Page 6. The display will read:

SEND MIDI PROGRAM: 0-00 TO 0-00

➄Use the [VALUE/ENTER] knob to select a User Program from 0-00Ð1-99, or the current Program being used (EDIT), or ALL User Programs.

To send all User Programs, turn the [VALUE/ENTER] knob all the way to the right to select ÒALLÓ.

Optionally, when sending a single Program to another Q20, you can choose to send it to a different location. When you select a Program to be sent, the second field (which represents the destination location) is linked and moves along with it. To select a different location number to send this Program to:

➅Press [PAGE >] and use the [VALUE/ENTER] knob to select a destination location (0-00Ð1-99 or EDIT).

If you chose to send ÒALLÓ User Programs, the second field will disappear.

➆Set the receiving MIDI device to receive or record the MIDI information about to be sent from the Q20.

➇Press the [VALUE/ENTER] button to transmit.

If sending ÒALLÓ User Programs, during the dump the display will read:

MIDI PROGRAM DUMP IN PROGRESS...

Q20 Reference Manual

89