Chapter 1 - Setting Up

Tap Tempo

Either footswitch jack can be used to provide a tap tempo source for setting delay time, provided the selected Program uses one of the two available tap tempo delay types. This requires that you have defined an Effect Block as one of the two Tap Tempo delay types, and that the desired footswitch jack has been selected for controlling tap tempo. To select a footswitch jack for use with a Tap Tempo Delay:

➀Press [GLOBAL].

The [GLOBAL] LED will light.

➁Press [< PAGE] twice to select Global Page 8. The display will read:

TAP TEMPO FOOTSWITCH: NONE

➂Turn the [VALUE/ENTER] knob to select either the ADVANCE or BYPASS footswitch jack, depending on which one you wish to use to control tap tempo.

Note that some programs can override these footswitch settings by re-assigning pedals as Local Generator Sources in the Modulation pages. See Chapter 6 for more information.

18

Q20 Reference Manual